CRL Nickel Plated Adjustable Mirror Clip set for 1/4 in (6 mm) Straight Edge Glass - Package

My existing bathroom mirror used these mirror clips so there was no mystery on how to install them. That was fortunate, as the instructions weren't perfectly clear. I bought this new set instead of scraping two layers of paint off the existing set when installing a new mirror. All four clips are adjustable. It would be simple to have a non-adjustable set for the bottom clips but that would require different manufacturing tooling. Instead, the bottom clips are made non-adjustable by installing mounting screws through the base AND the sliding clip. For the top set, a mounting screw is only placed through the base, so the clip can be moved up to clear the top of the mirror and then pushed down to engage the top of the mirror. Hopefully, the attached image explains it. I used drywall screws for the base and the supplied screws to pass through the base and clip on the lower clips. I did trim down the supplied cardboard anti-rattle shims so they weren't visible outside of the clips. The install of a new 40" x 48" mirror was a piece of cake after ensuring the bottom clips were leveled and the upper clips were mounted high enough to be above the mirror when extended. I pre-installed the lower shims before inserting the mirror and then slid in the upper shims before sliding the clips down into position. Having a second set of hands definitely helped.

These were nicely made, and super easy to install. I was installing my mirror on a thinner closet door, so had to buy a shorter screw for that, but it worked great! They perfectly fit 1/4" thick glass - not sure why some reviewers said they were too big. I trimmed down the cardboard pieces that keep the mirror from scratching - they are oversized and don't look good that big. So I trimmed to fit.

works great on all the mirrors I hang for customers and look good. Easy to use.

These are HUGE and well made mirror clips. If you were looking to hang massive heavy mirrors for a gym or other industrial area these would be great. These are not for your normal bathroom mirrors. If you are looking to replace the plastic mirror clips for you bathroom mirror for metal these are not it.

These were great. Used for mirror with no frame. 5ft x 7ft. Unfortunately the wall was unknowingly not completely level and mirror broke from other stressors bc this was for my home gym. I believe it'd still be holding the big heavy mirror if I also used an adhesive for the mirror to stick closer to the wall. I will be trying these again. User friendly tho Idk what the little cardboard inserts were used for. Didn't work for this project in particular.. do recommend stronger/longer screws if using to hold significant weight

Wery happy with a product, easy to use and install. I like the fact i can adjust the clips for installation or when removing the mirror just slide locking pins up and you can take down your mirror

Easy to install and gets the job done. Please note that these mounts create a small air gap between the wall and the mirror. So it looks like the mirror i floating just above the wall and not completely flat against it. Not a problem as long as you are going for or dont mind that look.

I ordered these to mount a 42x48 mirror onto a wall using studs. These brackets seem sturdy enough to do the job and easy to adjust. The screws that come with are a joke though. They are either an inch or an inch and a quarter long. They are also number 10 diameter screws with a number 6 head to fit into the recess that sits behind the adjustment clip. The screws are way too short to go through drywall then have any holding power in a stud. I had to go to my local hardware store and buy some bugle head number 8 two inch deck screws. These sit into the recess low enough and will have enough shear strength to support the heavy mirror. They also don’t ship this with any kind of drywall anchor. The manufacturer needs to include anchors and either make the screws longer or not use proprietary screws.

Used to hanging mirror with 11 mm boarder. Meet expectations

Son excelentes y hacen su función perfectamente, el tamaño es muy práctico

Well manufactured product, makes it easy to secure a mirror to a wall or similar structure.

The card board liners are useless. They offset the mirror from the wall too much because of the poor design. Threw them out.