PC74 Bulbs

The plastic bases included with these LEDs do not fit the dash of my Honda Element. But salvaging the OEM bases from the dash and putting the LEDs into them worked. Its a bit tricky to remove the old glass bulbs from the bases without breaking them. I used a pair of pliers and a paper towel to pull and wiggle them out of the base. After that I slipped the LEDs into the base and installed them back into the dash. Keep in mind that these LEDs might not work if they are put in in the wrong direction. You might need to pull them out of the base, spin them 180 degrees, then reinstall to get the right polarity. Once installed they look good, not too bright and have a nice red color. Great for night driving.

Work really well. Makes everything bright like it was designed today. Whites are bright white, reds are bright red etc...!!! Very nice update. Seller is correct.. if they don't light, remove the bulb and rotate 180° and they'll work( unlike a few others I've tried). Pictures don't do them justice because of the glare from main instrument cover. Added a photo of the climate control panel to show the difference between the original muted greenish to the new.. better white with these lights.

Clean white color and much brighter than stock bulbs.

Just installed them today. I bought two packs the Amber & the Blue ones because I'm replacing all the lights in my odometer. They were initial tricky to install, you just have to really push the LED Light in the black plastic holder but once you get that done it goes inside the instrument cluster just like the OEM ones and you just turn it 90 Degrees to lock the bulb in just like the OEM ones. They aren't as bright as one would expect for LED but they still look waaay better than OEM. They look really good, they don't blind you. So I think the idea behind the design was to give you what you need is more light but not bling bling light. Which I don't care I'm just grateful that they work and light up the dash pretty nice, even the Odometer lights up pretty nice now. With the blue ones , I replaced my turn signals and now I get a cool blue arrow indicator light when I make turns. The blues don't work that well with the other odometer lights so I just used my amber LED ones and they look really good. I think Honda designed the CR-Vs to only work with Amber but who cares? They work great. I would definitely buy again from this seller.

four of the 10 doesn’t work the ones that do are good

Bought these bulbs to replace burned out guage cluster lights and the shift selector light in my 08 Taurus. One word up front, these bulbs can be installed with the polarity reversed, and will not function, but reverse them in the socket, they should work. They are bright! I only wanted to do this job one time, and it's less expensive to buy 10 of these than 4 regular bulbs from outside sources. These T-5s fit perfectly in the original sockets from the cluster, but the sockets included would not fit. That's OK, nothing was wrong with the originals. My guages are no longer half-dark, and I also replaced the turn signal bulbs, which used 9 bulbs of the 10 in the pack (includes the shift selector). They come in a resealable pouch. The turn signals being as bright as they are reduces the chance you'll forget to cancel them, they are much, much brighter than stock, they'll get your attention! One was a failed bulb, the solder was broken at the top bulb, and would not function. With the guage lights, there are 2 types of incandescent bulbs avaible that will fit the sockets, if you get the wrong one, it can damage your cluster. The LEDs produce no heat, so no risk, there. I chose white bulbs, because my gauges are green when lighted up, so I don't know the effect different color LEDs would have on the markings.

These LED bulbs worked fine. No complaints.

Produce is very nice and bright. The only problem I had was the color of 8 of the 10 LED bulb replacements were pink. Only two were green. Fortunately for me, the owner of the vehicle was ok with it as is, otherwise I would have had to send them all back and request another order. That would have caused another week delay in delivering a vehicle to the owner. So they only get 1 star since they did not deliver 80% of the bulbs correctly.

Excelente calidad del producto

Very good product. Not just for Dashboard Instrument Panel and other places - as specified in supplier's product description - for my 2013 Nissan Rogue, but also these small LED bulbs fit in the Glove Department, in original Nissan socket. Supplier should add that in description, because it is very hard to find LED replacement bulb specifically for Glove Department for some years of Nissan cars.

Muy buenas para reemplazo T5,, a la medida y alumbran muy bien,

They worked well for my S10 dash.

Buen producto, con medidas muy exactas para su instalación en el closter del tablero