KeySmart

had the plastic version for YEARS until one of the ends near the screw started to chip away. Upgraded to the aluminum version and am very pleased with the quality and function. Looking forward to many years of future use.

It had gotten to the point my.keys were just ridiculous, too heavy to comfortably have in any pocket, too bulky to cram into a pocket or hang from a belt loop. The listing seemed too good to be true, like an "As Seen on TV" type of shenanigans. I WAS SO WRONG. First and most shallow, it looks like a nice piece of quality crafted gadgetry. Not cheap in any way, I can whip my keys out at McDonalds or for a valet and feel zero conflict about how they might present. Noice. Also - The low profile containment is an absolute game.changer! Getting my keys off the old ring was FAR more difficult than setting up this one from start to finish. Don't be I timidated thinking it's going to be a nightmare, it went quick & smooth on the first try, all my keys now lie inside this toothpick holder sized gadget, I have my fob attached, and it was easy to organize my keys however I needed to in order to have the fastest access no matter what I needed to unlock. Sturdy, comes with everything you need EXCEPT you will need a dime or a flathead screwdriver to do a final twist on the fastener - there's 2 total. I used a dime and have had no issues despite putting it through a rigorous daily "dig to the bottom of the abyss " to find them in my hoarder like purse. I'm thrilled to find such a unique and effective item for myself, and also have them in my save for later for one click holiday shopping, DO IT YOU WONT BE SORRY. QUALITY + VALUE = WINNING

I have a GM Passkey 3 key with the passive RF transponder embedded in the black plastic key head so I purchased the Titanium Extended model. I decided to try the Titanium because of the scratching and/or poor tooling quality reviews on the Aluminum versions. Packaging: The packaging was a yellow padded envelope with small ziplock bags containing all the small parts. I was a bit disappointed to see that the scratching issues with the Titanium model was the same as with the Aluminum models reported in the reviews. I share the opinion that if something is purchased retail new, it should not appear as though someone else has already tried it out with light scratches on the plates and head buggering marks in the slots of the screw heads where a screw driver or US quarter has been used to torque the screws. The scratches were not manufacturing tooling scratches, as some were on the inside of the plates and have a radius to them consistent with a key placed on a pivot at the post. I believe I may have gotten a used unit as did other reviewers, and due to the frequency of the Amazon reviews the seller likely recycling returned units as new. For a premium product at premium prices in 2015 America, this is under par. Assembly: The video instructions on the website were good and I was able to get to a spacer / key combination within 10 minutes and 3 trials to a nice compact package. A little o-ring on each screw head provides the friction to stop the assembly from coming apart with use and vibration. Time will tell how well it works or whether it needs a dab of Blue threadlocker on the threads. Design: I purchased the 2-10 key unit which means that it comes with 2 threaded stacking posts which are very nicely manufactured. All of the parts are very nicely machined with no burrs or roughness. Very precise, tight fitting, straight and accurate. The manufacturing quality is certainly high for this product; I'd say quality control and machining standards for the screw fittings are similar to that of a $1000+ Swiss watch; very nice. The Titanium plates, however, are a manufacturing standard lower. The edges are finished and deburred, but there are rough visible tooling marks on the edges that would not exist on a standard $15 Victorinox Swiss Army knife. So they probably put the plates into a ceramic media tumble polisher after stamping, but do not go through the extra step of grinding the internal long concave edges smooth. The convex ends of the plates near the screw posts do appear hand ground and finished as the tooling marks are absent on the ends with a smoother finish. The spacer washers are a black composite material. Not metallic, nylon, or pure plastic, but appears to be a combination plastic matrix it appears - perhaps Delrin. These seem to protect the plastic keys and give a nice friction to the movement. Sizing: The package contains enough spacers for 10 keys, but the posts are not tall enough for 5 standard metal keys on each post. You can get max 4 metal keys on each post if using the spacers correctly. Perhaps if you do not use any spacer washers you could squeeze 5 keys, but then the end keys will scrape along the sides. A thick plastic head GM car key takes up the width of 2.5 to 3 keys (depending on an end or center of key measurement). These width details and width sizing guidance are not provided on the website. Perhaps these details can used by others to avoid purchasing errors. Overall Impression and Function: Works well. It gets rid of the key ring jumbled mess I had. I'd say it's about 30% too expensive for a key solution, but I can't design, test, source the parts and manufacture this for the one-off price. Nicely done KeySmart. It's not perfect, as it does not directly address having a small flashlight, knife, or electronic car key fob. There is a little key loop extender to attach the car fob to, but where's the elegance in that? I like it well enough and would recommend it for that obsessively optimizing perfectionist geek, or that city dwelling metrosexual minimalist. It's a nice gift to give (for the geek that can appreciate it) and nice to own. A little bit of functional luxury in the pocket.

Nice little but durable key organizer that isnt as much as that orbit key stuff so i'd say its worth it. I keep four keys in it with the spacers in between and they fit in securely. The color is a nice metallic red that I like and it looks sleek. It is very easy to set up keys and it doesn't take up a lot of space nor is it bulky. I have quite a big of stuff on my lanyard but this organizer is lightweight but still metal and the screws that keep everything together are strong too. I was afraid they'd loosen over time or wesr a lot but in the 3-ish(?) Months I've had this, they're still keeping everything together securely.

Best key chain, easy to use, keeps keys neat, organized and protected. No more bulky pockets or getting stab by keys. Everyone who sees it wants one.

I ordered the carbon fiber design, and when I received it, I noticed that the carbon fiber was coated with a glossy resin. Sometimes, I wonder if it is genuine carbon fiber. I know some companies like to print materials that mimic carbon fiber to keep costs low—I hope they didn't do that. Installing your keys was pretty easy. The accessory has a QR code that directs you to a website with a thorough installation video. The only tool you'll need is a quarter or a penny to remove the screws. However, be careful with the screws, as their coating is not scratch-resistant. I pried them slightly with my fingernails at first, and it scratched the paint off a section of a screw. There is a small hole on one side that can be used to hold accessories or your car key fobs. I should mention that the ring needs to be thin. Otherwise, your keys won't be able to fully open, or you'll need to move the small hole all the way to the end and let the ring droop slightly for the key to extend 90 degrees. I'm also not sure if you can fit 14 keys in this device. The extended screws provided appeared to hold only up to 5 keys on each side, totaling a maximum of 10 keys. Standard keys these days are not thin. However, if all your keys are thin, then 14 can certainly fit. They do provide filler rings to balance your keysmart. Overall, I like the appearance and convenience of the accessory, although there are some things I wish they would improve. The idea of adding extra attachments to make it work as both a key holder and a Swiss Army knife is quite intriguing.

Great item

I carry a few keys. It's not a whole pile; I don't have a hula hoop hanging off my belt like some comical custodian from an old teen movie. But I carry a few keys. I bought a key organizer with a built-in Airtag holder and found it helpful, but it could have been better constructed; it was already falling apart. I decided to go for a better-quality product from Key Smart for an upgrade. It was easy to add my keys. I was excited. It was cleaner, sleeker, felt great in my hand, and ready to go. The package says it will hold ten keys—a blatant lie right on the package. Luckily, the Amazon listing says eight keys. Now, it only holds eight keys if you don't need the little metal doohickey that allows keychains to be attached. If you need that little doohickey, which I do, it only holds seven keys. That would have been great, but I also bought the little safe box opener from Key Smart (reviewed separately), which is key number 8 for me. So here I am with a key organizer that won't go together because it only holds eight keys, and I'm trying to make nine fit. So I ended up back on Amazon looking at maybe returning it and ordering a larger organizer. I see there is an accessory kit, so now I patiently await that little kit with the longer screws to get here so I can get all my keys organized. Now that I've addressed the lies on the packaging, let's talk about the product itself. I wouldn't recommend the leather one. I scratched or bent it at some point in the assembly process, which is sad. If you're a super careful person and probably less of a lumbering oaf than I am, you'll probably be fine. The leather doesn't feel all that great, and I would have been happier with the metal one, but the leather was cheaper, and now I know why. It comes apart and assembles rather intuitively, so bonus points for that, but I ran into issues when I believed the lies on the packaging. All in all, I'll be satisfied (note not happy) when all the pieces are together in one spot, and I can get it to work how I want it to. I'm not mad; I'm disappointed that the packaging lies. I had to buy a second product to make the first one work; the quality could be better. Will I return it? I can't because my keys got it dirty, and I scratched or bent it, as I mentioned earlier, so no, mostly because I can't. Will I recommend it to friends and family? Only the metal one, and I'll tell them to count their keys before buying one and ensure it will do what they need. Update: 5/8/2025 So, I was just looking at my key holder today, and the leather is already wearing out after a little over a year of use. I've downgraded my review to one star from three. At this point I can wholehearted not recommend buying the leather version of this key holder. I'm not particularly rough on my keys. I'm a dang office worker. The roughest thing that happens to my keys is I drop them now and again. If your product can’t hold up to being pulled in and out of a coat pocket, thrown in a bag now and again, tossed in a car cup holder, tossed on top of the dresser, or even dropped for more than a year, I don't know why you still make it. For additional reference, I have the leather Airtag holders from Apple, their leather products were notoriously mid-tier, and they're in better shape than this key holder is, and I've had them longer. I also have a leather key cover for my car key that is made out of super cheap leather and it it has one tenth of the signs of wear that any of the aforementioned leather products have and it gets handled by mechanics. Just saying. At this point, don't buy the leather one. just go ahead and buy the metal or the plastic one, I'm certain they'll hold up better than this.