Single Monitor Arm, Adjustable Desk Mount for 13-34 inch Screens, Holds 19.8lbs, 22.44 inch Max Height, Full Motion Swivel Gaming Monitor Stand with VESA 75x75mm and 100x100mm Compatibility

Easy to assemble and works well. Well built and sturdy.

Totally awesome! TLDR : An awesome mount at a great price! SCEPTRE e225w monitor owners please read further. Installation 4/5: Pretty darn easy. You may want a 2nd person just for help holding thing because it is a wee bit awkward at times but I did it on my own and things turned out just fine! Make sure to adjust the tightness of the arm once your monitor is already mounted and keep your arms near it while testing just in case. Compatibility: 4.8/5: there are 2 mounting methods for desk and monitor. My desk is about 1 cm thick and it is able to clamp down and hold tight. The monitor mounting system also includes 2 sets of screws. One for normal mounting and one longer set to be paired with spacers for round back monitors. It fit perfectly with my fiences monitor ( onn brand) !!!ATTENTION SCEPTRE E225W OWNERS!!!! this is the monitor I have and if you want to successfully and safely mount this monitor you will need to use the mounting spacers included with your monitor when you purchased it( they look like motherboard standoffs) If you , like me , lost these simply contact scepter customer support or tech support. It's super easy and they will send you a new set free of charge. Accuracy 5/5: This is exactly as it was described and I have absolutely 0 complaints! Movement 4/5: Once you adjust the tightness it is fairly easy to move around. Some combinations of directions are more dificult than others but this will happen with every mount of this type it's just impossible to get around. The most dificult movement is raising or lowering the entire arm up or down the pole. I would not recommend this mound if you are wanting to do this specific motion multiple times per hour. However all the other ranges of motion are absolutely awesome!

I bought 2 of these one in feburary of 2024 and one in august. Both are still stable and snug, even through earthquakes. I bought the Dual arm, but found that It was easier to just use it as a single. Once you adjust the tension properly the monitors sit right where they need to. Some shoddiness on the plastic pieces on the clamp as the cable managment just pops off if you bump it wrong, but otherwise a solid product. I am using the clamp mounts. Setup was quick and painless. I am using them on a 27" and a 19" monitor. The dual mount is on my 32" samsung which is lighter than the 27". None of the arms have slipped or bounced out of where I put them and all of them move and rotate if i need them to. Would buy again. Would recommend to others.

This is my first monitor arm purchase. All the parts of this arm work very well together. Easy to clamp it to my table. I'm using it with an ASUS Proart 27" monitor. I like the monitor to sit low near the table surface, and this arm works for that. Adjusting the monitor position is smooth. The package includes multiple Allen wrenches, screws, washers, and other things. Cable management was a breeze for me, and not an issue. I laid the cables on the arm, but there are cable management routes and clips on the arm (see the picture). Keep in mind, when you look up the weight of your own monitor. The first weight you see might be the monitor and stand together. Find the weight of the monitor alone. It will be lower. My Proart 27" monitor is heavy because of the features like USB hub, but it's still only 10.65 lbs, which is well below the max weight for this arm.

I have a big 32", heavy, LG monitor. It has an enormous stand, whose foot takes up my whole desk. This beast of a stand fit exactly into the mounting square on my monitor. It doesn't cover, or interfere with any of the connections on the back. My connections are adjacent to the mounting recess. The shipping weight of this monitor is 22.8lbs. Minus the packaging, that puts the monitor in the 19-20lb range (11kg). The setup was easy. It was maybe four steps. It is sturdy, and the gas spring has plenty of strength. The mount allows for adjustment in all directions: rotation, tilt, turn, and height. It will rotate vertically, for portrait orientation. It mounts either by edge clamp, or by drilling a small hole through the desk and bottom clamping. I chose edge clamping. It holds just fine, and sits discreetly off to one corner. I finally have my desktop back! Great item. Great stand.

(I also own the dual-arm version of this mount and some of the review is the same since the products are very similar) This is a pretty good monitor arm mount. It is sturdy, went together fairly easily, and holds my monitors steady. This company has a version that is identical to this one except it has two mounting arms and the vertical post is slightly taller. The arms are compatible between them. Both are good products despite the Chinesium brand name. When you install this, I highly recommend releasing some tension on the gas cylinder in the arm *before* you take the velcro strap off that holds it tight during shipping. The C-clamp has a very wide range of thicknesses it can work with. Unless you have a freakishly thick desk, I doubt this will not fit. The only other issue I could see is if you have a melamine or MDF desk. These are commonly called "particleboard" and are the cheap stuff from IKEA or Office Max. Melamine and MDF are great because they are dimensionally stable: they do not warp based on temperature or humidity. However, their shorter wood grains mean they are not as strong as real (unprocessed) wood. I custom built my desk out of solid 3/4" (19mm) oak. I have two of these mounts and one of its big sisters with two arms. They are all torquing the wood since the clamps are off-center from the monitors, but there is no warping and everything is straight and level because oak is strong. I am not saying this product will not work with melamine or MDF. It will probably be fine. However, the desk may fail eventually. It might warp from the twisting force of the clamp. It might break - unlikely, but possible. This is just something to keep in mind, and is more of an issue due to the desk, not the monitor arm.

Works great. Excellent price.

I've developed some back issues and need to be able to work standing. I started looking at motorized sit/stand desks and stand desk converters, which all seemed over-priced, wobbles, and break after some time. This adjustable mount is a very economical alternative at $38. I'm 5'8", and it raises enough that I can view my monitor standing. My head is slightly tilted down, which is comfortable for me. If you're taller though, it may not work as well as a stand-up monitor. Actually, I would not recommend it for someone taller than myself if you're trying to achieve a stand-up solution. I bought a mouse/keyboard riser as well. The unit is very sturdy once it's all in place - raises and lowers easily after adjusting the tension. Only thing with the assembly is that the screw holes which attaches the clamp to the riser was not threaded on my copy. I'd recommended using one of the screws to thread each hole before assembling, for sanity sake. I added one zip tie, which probably is not necessary. The built-in cable management is awesome! Very happy with this unit. I'm curious to see how long the gas piston is going to last.

Fácil de instalar, robusto, bonito, útil. Definitivamente buena relación Calidad-Precio.

I use the arm fully extended and attached near the top of the post. Sturdiness depending on the desk that it's attached to, the assembly will move a little when adjusting the monitor but otherwise I don't have any concerns with it sagging for my 27" monitor. Due to my home office desk set up, I adjust the monitor 2-3 time a day. When the hinges and gas spring are set properly, the arm is easy to move and it seems like the arm will last me a while. I have the back of my table against a wall and the arm folds nicely so I don't need space behind the table to accommodate movement. Overall, I am very happy with the value for money, it not as fancy or sturdy as the very expensive dual arm set up at my work place but I find this easier to assemble and adjust. Also, compared to the dual monitor arms, I prefer having separate arms for each monitor because the distance between the table clamps can be moved to get better range of motion while maintaining alignment of my monitors.

The price was right, and installation is easy, but the build quality is poor. If you need an inexpensive and poorly made/low quality stand, then this thing will work for you. The adjusting screws are difficult to fine tune and don’t really work that well. The only thing good about this item is the price.

Articolo molto robusto e maneggevole, lo consiglio.

Top