HIPPIE CRAFTER Double Sided Tape for Woodworking, 2 Inch Wide Heavy Duty Woodworking Tape for CNC Machines and Routing Templates, Removable & Strong, 90 Feet Long.

This tape is no joke; it's hold capacity is intense! It is so strong, my least favorite part about using it is prying my wood up from my planer sled to flip or remove it! That said, this tape can be re-used in a planer sled application - if budgeting your materials and saving money is what you're into. It sticks to melamine well, and if you pry the wood up off of it correctly allowing the tape to remain on the melamine sled, you can stick a new piece of wood on the used tape, press it down well, and it runs through the planer just fine. Even with some sawdust on the tape, it still holds incredibly well. I go as far to store my planer sled with the tape on it, and reuse it weeks later, lol. One of these days, I can see my putty knife breaking that I use to pry the wood away from the tape. I love that it comes in a 3 pack, however I'm probably around 1/2 through my first roll and have been using it a while. Would highly recommend this product to any woodworker.

I can't say enough good things about this double stick tape! As a CNC machine hobbyist, finding reliable adhesive to secure materials during machining is crucial, and this tape has exceeded my expectations in every way. From the moment I started using it, I was impressed by its strength and durability. It holds my workpieces firmly in place, allowing for precise and accurate cuts without any slippage or movement. What's truly remarkable is its versatility. Whether I'm working with wood, plastic, or even metal, this tape holds strong and ensures that my materials stay securely in place throughout the entire machining process. Not only does it provide exceptional adhesion, but it's also incredibly easy to work with. The double-sided design makes application a breeze, and it peels off cleanly without leaving any residue behind, saving me valuable time and effort in cleanup. Overall, I couldn't be happier with this double stick tape. It's become an essential tool in my CNC workshop, and I highly recommend it to anyone in need of a reliable adhesive solution. Five stars all the way!

This works great for holding down a board while being routed on the CNC machine. The first time I used it I used too much and had a very difficult time in removing the finished piece. Since then, I've found that it's not necessary to cover the whole bottom of the wood; a strip of tape every 3 to 4 inches will hold it tightly. It's quite sticky, the thickness is appropriate and doesn't interfere with anything and when I run out, I'll buy more as it's become my go to method for holding down boards when the table clamps won't work.

So far I have had success using this tape, it does stick fairly well but on smaller areas I have noticed it will have some movement in the straight edge piece. I think this is because it's kind of thick but also I think it is because this tape is really difficult to cut, its so stick that even a fresh razor only gets a few clean cuts before the blade is gummed up. This causes the tape to roll onto itself during the cut and reduces adhesion and also makes it thicker in the corners. Most likely I will try a different brand next time.

Double sided woodworking tape is essential and has hundreds of uses. But some of it is so expensive. This product offers a reasonable cost and excellent quality with great hold and easy release. If you do woodworking you know what I mean. Try some.

Excellent double stick tape. I use it in woodworking primarily to hold pieces in place for machining. It is thin, very sticky, but comes off cleanly.

The tape is very effective. It does seem surprisingly gummy compared to others I've tried but it holds really solidly for template routing and it will release with some persuasion (read ya need to pry the two pieces apart). So far I've used it to hold small parts in a routing template and to hold those to a base to run through a table saw. Worked really well for what I needed. As always ya gotta be sure your parts are held firmly in place before doing any cutting but if there's no room for a destaco type clamp to hold the material this tape may work for you.

The best two sided tape I have found. Holds patterns firmly to project and to be routed

all good

Recomiendo mucho esta cinta para trabajos con madera, yo la utilizé para pegar papel de lija en un nivel de aluminio para poder nivelar la madera de un brazo de guitarra, no se ha despegado despues de mas de un mes y sigue firme como el día que la puse, recomiendo la cinta para esta aplicación.

Good but sometimes doesn't stick properly

Used for wood projects and found myself using this in many other instances. Really useful in the shop and around the house.

Esta cinta adhesiva de doble aldo es excelente, tanto para uniones temporales como permanentes. Yo lo utilizo en carpinteria para unir dos piezas para hacer un corte identico y luego separar las piezas.