Gelid Solutions GP-Ultimate - Thermal Pad 90x50 Excellent Heat Conduction, Ideal Gap Filler. Easy Installation Thermal Conductivity 15W (90x50x0.5)

I purchased these to change the thermal pads on my Zotac 3080 Amp Holo as my memory temps were hitting 104 to 106 degrees Celsius at 70% PL and 100 fans. After using these thermal pads my memory are sitting at 78-82 degrees. These are amazing results. One more thing due to cold weather in north india when these pads were delivered they were little hard but after keeping them near GPU they became soft. In the picture the small pieces on side are the old thermal pads. Kept them in case warranty is needed I will put them back before taking to service center

My SSD ran into some thermal throttling issues, the heatsink I attached on it was not working well, thanks to the cheap thermal pads I used. I replaced the cheaper ones with this (I know it's for GPUs but I was desperate) and the difference was day and night. SSD never goes above 60 degrees even at high load. gonna get a thinner one to reapply for my GPU VRAM and controllers.

Reduced my gpu vram temps by 20°

I've used it on motherboard components attached to heatsink of MSI GV62 8RE. So far so good. Review after one week : 1. Although under full load my laptop still goes over 90° (typical MSI Problem) but it's atleast a bit better now, it stays at 94-95° but previously it used to reach around 98-99°. So I'm seeing a 4-5° cooler now. 2. At Idle : Previously my laptop used to stay at ~75° at idle but now it stays around 35-40°. So a pretty considerable jump there. 3. At mild Usage : previously ~85°, now ~60-65° Note : I also used Kyronaut's Thermal Paste on CPU & GPU along with this pad on components attached to heatsink. So results are accordingly. Installation : these are quite easy to install, it was my first time using thermal pads and I didn't had any problem so you won't have any either. Size : 1 Pad covered all essential parts needed to be covered, except ssd. So yeah good size for heatsink installation. Verdict : Go for it, these are better than stock thermal pads company provides you out of the box.

The product is good. Shipment was on time. Coming to pads - For noobs - These are harder compared to silicon ones. Therefore cut it wisely with a proper blade, or else you can break it. I Used 3mm for backplate of my gigabyte 3080, Along with 2mm for front. Did wonders. The stock ones melted, and replacement reduced the temps drastically Thermal throttling is no more there. Went from 59-62Mh/s to 102 Mh/s

Fantastic performance, previously i used thermal grizzly pads on my zotac 3070ti amp holo. They had little to no effect on the card, as the memory temps consistently touched 104 under heavy gaming. But with GELID it doesnt go past 90 no matter what. Without a doubt the best pads.

I ordered the Gelid Solutions TP-GP04-d thermal pad for ₹1,149 from Scorpzon Trading Pvt. Ltd., but was very disappointed with what I received. The product was in poor condition — the thermal pad looked old and partially degraded, not at all like a new item. To make things worse, the size did not match the product description, making it unusable for my intended purpose. I also noticed multiple date labels on the packaging (03/25, 12/23, and 08/22), which was confusing and raised doubts about the actual date of import and product freshness. Given the high price, I expected a premium product, but this did not meet even basic quality standards. Not recommended.

It is great for RTX 30 series memory temp. problem mine just drops from 104C to 84 C. great product in good prices.

Sehr gute wärmeleitfähigkeit habe sie bei meiner RTX 3090 verbaut

I used this (and a few other thicknesses) to replace the stock thermal pads on an Asus 3090 ROG Strix. I was temperature capped (96 degrees) at 110mh and now I can get up to 125mh while maintaining decent temps (94 degrees). At 110mh my temp is at 82 degrees, great, but that's not what my goal was.

la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000

perfecta para una 3090 ,baje temperaturas de memoria ram y la calidad de las mejores

Ben impacchettati, questi thermal pads con una conduttività termica di 15W/mK si presentano solidi e già freddi al tatto. ho preso la versione 1,5mm e la 2mm per la mia 6800XT FE anche se a posteriori avrei dovuto prendere la 1.00mm. nel complesso fanno il proprio dovere, le temperature sono scese come da programma nonostante la misura sbagliata (errore mio!). delicati ma non troppo, si piegano un po' a piacimento e si riescono ad appiattire circa del 20-25%, massimo 30% usando molta forza o un cacciavite come "mattarello". qualità comunque TOP rispetto ad altre marche. punto a favore per gelid: indicano sempre la conduttività termica, cosa che alcuni produttori non fanno. Spedizione sempre al top.