American Standard Pressure Balancing Unit, For Use w/2TGW5

The American Standard M952100-007 shower replacement mixer is a high-quality valve designed to control water temperature and flow in your shower. Here's a detailed review and installation guide:*Review:*The American Standard M952100-007 is a reliable and durable shower mixer valve that provides precise temperature control and smooth operation. It's designed to replace existing American Standard shower mixers, making it an excellent choice for renovation projects. The valve features a 3-way diverter, allowing you to switch between showerhead and handheld shower or tub spout.Pros:- Easy to install and adjust- Precise temperature control- Durable construction- Compatible with American Standard shower systemsCons:- May require additional parts for installation (e.g., adapter rings or escutcheons)- Some users report needing to adjust the temperature limit stop for optimal performance*Installation Instructions:**Tools and Materials Needed:*- Adjustable wrench or basin wrench- Channel-type pliers (for removing old valve)- Needle-nose pliers (for removing retaining clips)- Teflon tape or pipe dope- American Standard M952100-007 shower replacement mixer- Additional parts (if required):- Adapter rings- Escutcheons- Temperature limit stop*Step-by-Step Installation:*1. *Shut off water supply:* Locate the shut-off valves for your shower and turn them clockwise to shut off the water supply. Open the shower faucet to drain the pipes.2. *Remove the old mixer valve:*- Use an adjustable wrench or basin wrench to loosen the old valve's bonnet nuts.- Remove the bonnet nuts and washers.- Gently pull the old valve out of the wall.3. *Prepare the new valve:*- Inspect the new valve for any debris or packaging materials.- Apply Teflon tape or pipe dope to the valve's inlet threads.4. *Install the new mixer valve:*- Insert the new valve into the wall, ensuring proper alignment with the shower pipes.- Secure the valve with the bonnet nuts and washers. Tighten the bonnet nuts by hand, then use the adjustable wrench or basin wrench to tighten an additional 1-2 turns.5. *Connect the shower pipes:*- Attach the hot and cold water pipes to the corresponding inlets on the valve.- Use Teflon tape or pipe dope to secure the connections.6. *Install the 3-way diverter:*- Attach the diverter to the valve according to the manufacturer's instructions.- Ensure proper alignment and secure the diverter with the retaining clip.7. *Test the valve:*- Turn on the water supply and check for leaks.- Test the temperature control and 3-way diverter to ensure proper function.8. *Adjust the temperature limit stop (if necessary):*- Locate the temperature limit stop on the valve.- Adjust the stop to limit the maximum temperature according to your preference.*Tips and Precautions:*- Always turn off the water supply before starting the installation.- Use Teflon tape or pipe dope to secure connections and prevent leaks.- Ensure proper alignment and secure the valve and diverter according to the manufacturer's instructions.- Test the valve thoroughly to ensure proper function and temperature control.By following these instructions and taking necessary precautions, you should be able to successfully install the American Standard M952100-007 shower replacement mixer. If you're not comfortable with DIY plumbing projects, consider hiring a professional plumber for assistance.

EXCELENTEPARA REMPLAZO DE REFACCION MONOMANDO

Perfectly match the valve, and works.

Excellent service. I received it a day earlier than expected and it was a blessing as I couldn't use the shower. The water was scorching hot. I purchased this part along with the cartridge, better to replace both at once to avoid having to open up everything again....and my shower is now in full operation! Never been so happy!Very Important - The old part was extremely hard to get out and I saw a lot of posting about this. Here's what I did:- Use a paint can opener tool and slowly try to pull out using the grooves around this part. This part is plastic so you have to be very carefully to break it out.- Throughout the process of trying to pull it out, I was spraying oil (WD-40 kind) and trying to spray it in. Waited a minute or two and began pulling out again.- You need to be very patient. The trick is to pull out from all around. It's not just about applying full force as you can break it and then you're really stuck.- Once you get it out, check to see that the rubber rings are not stuck on the inside. If so, take them out with pliers before inserting the new part.

LIFE SAVER! stopped the never ending drip, fixed the temp adjust problem, all in less than 10 minutes!