NEIKO 03044A 1/4-Inch Drive Mini Ratchet Screwdriver Set, 8 Pc, Cr-V Steel, Tight Reach, 90 Degree Screwdriver, Low Profile, Close Quarter, Right Angle Offset, Short Phillips, Slotted, Torx Star

This is a perfect addition to my tool bag for work. I can use it on any 1/4 hex bit for getting into hard to reach or tight areas. With the 1/4 hex bit drive, I can use it with long screw bits, nut drivers, etc. Good quality and value for the money. Even bought a few to give away as gifts for techs.

Feels well-built. Slim enough to keep in a bag or pouch

It has come in so handy for assembling furniture. The only reason why I didn't get it 5 Stars is because the little switch that allows the tool to rotate clockwise/counter clockwise is easily pressed unintentionally while using it to tighten/loosen a screw. Otherwise, it is extremely easy and fun to use and is so much better than using a screw driver/hex tool. For the tight/hard to fit places, my Ryobi drill can't get it done but this tool does. I have small hands as I'm only 5' 1". It might not fit well for larger/taller people. However, when comparing it to a universal hex tool, it's still much better. I used this with my multibit set I bought from Harbor Freight. So, I'm a very happy camper. The tool is sleek, light weight, and overall feels natural. I have over 20 years experience of DIY and assembling furniture. I'm not an expert or professional, but also not the novice handyman. I'd highly recommend this for anyone because it's very practical, straight forward, and saves a good amount of time.

I have the tendency to go on and on in reviews so I will try to make this quick. The bits: Not the half@$$ed chrome I expected, but a nice sandblasted finish. Bits seem harder than I expect for such an inexpensive tool. The handle: It’s two pieces of punched sheet metal with a black painted finish. The sides are made of plastic. There are no sharp edges or burrs. The metal plates are kept spaces by a rivet at the end and at the pawl to serve as the pivot. The ratchet mechanism: The pawl is punched sheet metal with a rough chrome finish. The spring and detention for the pawl are housed in the handle itself. Selecting direction is easy, smooth, and positive. The bit holder and ratchet gear look to be cast and plated. The gear teeth have no burrs or rounded over edges. Bit holding is not by magnetism like I read in an answered questioned but by a small hairspring wound around the racket with the end serving as a crude detent. It all out of the way and can only be seen through the small crack between the ratchet and the front plate. There is a flange on the back to keep the bit from pushing through entirely. Overall very well made for the purpose and price. Yes, it could have had the punched edges smoothed out, but since it has no bearing on performance, it makes since to omit it to keep cost down. Overall a great tool for your pocket or, like me, and small tool bag to keep in my desk at the office. Would recommend.

I needed to tighten several screws on door hardware that had very tight access. I couldn't find the offset screwdrivers that I normally used. I received these the very next day and took care of the door hardware I installed. The ratchet made the job go quickly and smoothly. Great purchase.

Gets into tight areas and works well because of ratchet

Feels sturdy and holds the bit in place well. The switch for the ratchet direction is right where I grip so it switches the direction often which is annoying, and the ratchet distance is pretty big.

It works in tight spots perfectly. I have bought three different drivers and this is the smallest. Thanks

I first bought this tool in 2019, and I've bought five in total over the years - one for work, one for home, and three more because coworkers keep taking the one I use at work! It's just that good of a tool. It's been great for tight spaces where you might normally use an allen key; I don't have to keep pulling it off of the screw/bolt and repositioning it every half-turn. In that regard, it has sped up the process of putting flat-pack furniture together a handful of times. It has also come through in a pinch plenty of times at work when I needed to apply a little more torque to a small bolt than I could do with a screwdriver. I've used similar tools to this one that were thinner, making them a little better for getting into tight spaces, but their bit retention has always given up after a handful of uses. This little guy has been dependable for years.

Nice and handy set any household should have

Works great for bathroom fittings with only side access

yo no conocia la marca, originalmente iba a comprar un kit de bosch, mi marca preferida, pero luego vi que aun con el descuento, lo unoco que me interesaba era el mini-rarchet de muy buena calidad, pero con puntas y accesorios que ya tengo bastantes, por mucho menor precio, encontre esta opcion, que es el ratchet con 6 puntas y todo lo que necesito a muy buen precio, el tamaño esta perfecto para cualquier caja de herramientas, cabeza magnetizada, ideal para espacios dificiles de alcanzar

Ótimo custo benefício. Bem prático, acessa locais que outras não conseguem, e não ocupa espaço para estar sempre a mão.