Low Profile Camera Tripod Ball Head, 36mm Metal Panorama Ball Head Compatible with Arca 1/4” Quick Release Plate for Tripod Monopod Slider DSLR Camera Camcorder, Load Capacity: 33lb/15kg -GM36

This is a really nicely designed and constructed ball head for the price! So much better than the sub-$10 cheap ones. All the mechanical pieces move smoothly and there are a few things that stood out to me: - The ball joint has a plastic liner between the metal ball and metal shell, so once it's loosened you get a nice smooth movement without any grinding or stickiness - The knob to tighen/loosen uses a thrust bearing! (See photo). If you're not a mechanical engineer, the thrust bearing basically avoids metal-on-metal grinding/sliding when you really tighten down the knob, so it's not going to get stuck no matter how hard you tighen it. I was blown away when I noticed it - you don't typically see attention to details like that on relatively cheap hardware - The knob has a spring-loaded rotation feature - if the knob happens to be sticking out and getting in the way once you've tightened it, you can pull it out, rotate it in 60 degree increments and let go to tuck it away (see video). Again, really nice attention to detail! Build quality is excellent. The only thing that's a minor negative is the included arca swiss plate; it's a little cheap feeling compared to the rest of the ball head and it doesn't have a finger ring on the 1/4" thumbscrew, so you really need a coin/screwdriver to tighten it into your camera securely (I also wish the rubber on the top was textured for better grip and to prevent it from rotating). But It's still a perfectly functional arca swiss plate, so I can't complain and it's certainly not bad enough that I'd take a star away for it.

Well made, works smoothly and holds a DSLR with a medium range zoom lens attached with no tilting downward from the weight. Ideal size for travel tripods. Make sure to purchase a 3/8" x 1/4" thread reducing bushing. Most of the travel tripods use a 1/4" thread on the mounting stud. A reducing bushing is not supplied. The quick plate is small but was suffient for the aforementioned set up. If you are planning on using longer focal length lens' ie.200mm ~ 500mm, that are much longer and heavier you will want to invest in a ball head that will be able to handle the weight There is 3/8" threaded bore in the ball head if you plan to use an alternate quick plate system.

Wanted to replace the ballhead on my old Cullmann Magic 2 compact tripod and add Arca-Swiss-style compatability, so decided to give this (the GM36) head a try. This wound up being nearly the perfect size - not too big, not too small. As others note, this is pretty well-built for the money, and clamps down pretty securely. My only complaint: the main ball doesn't seem as smooth as I'd like it to be, nor does the panning functionality pan all that smoothly. Perhaps a few careful spritzes of PTFE dry lube spray will help things, but I'm still pretty happy with this.

For $30 bucks this ball head crushes $200 ones , it’s crazy !!! No creeping , no movement no anything. The weight capacity is a whopping 33 LBs but honestly if your mounting something on this that close to 33 LBs you need an actual fluid head mount. My 300mm lens is a heavy , ( check out my pics ) it has TKO every other ball head out of its locking position , from my manfrottos to my oben 🙄 finally big Bertha has met her match. The quick release plate has a ring for the 1/4” screw so no awkward “where’s my flat head screwdriver moments or for me “ does anyone have a penny I could borrow “ the only flaw I can say about this is the silver paint On ball joint. I don’t have it lasting cosmetically and it should have been black imo but the ball joint itself as a whole has a very solid build. What can I say you can’t be the worlds best ball joint , only cost $30 bucks and also be perfect. Neewer making a statement with this one. Don’t think about it buy this !!!

Works as intended, the lock 🔒 works very well, I just like this ball head, I use it on my Bipod.

Great budget ball head.

Very good set up for the cost very pleased

The lower pan knob on mine was defective. If you unscrew that all the way & remove it from the head, you'll notice it has a pointed end that is designed to press against the inside of the head & prevent the whole thing from panning left or right. For whatever reason, the point on the end of mine was de-pressed back into the screw (I should have taken a picture, kinda hard to explain). Anyway the result was the screw wasn't long enough to contact with the inside of the head, the threads would just bottom out & so there was no way to lock the head from panning. I returned the unit for a refund which was disappointing as everything else seemed to be well made & functional.

Doet wat hij doen moet

Very sturdy and well built

L'ho scelto perché era bellissimo! Ho verificato che è bellissimo! Ho preso atto, come avevo intuito, che è sorprendentemente funzionale e appagante per quel prezzo.

Fantastic Ball Head! Really works well!

La rotule semble vraiment costaud et de bonne facture. La boule est assez dure à faire bouger, avec un appareil photo, il n'y a peut être même pas besoin de la verrouiller. La fonction panoramique graduée fonctionne bien. Par contre, le niveau à bulle sous la plaque est inutilisable une fois l'appareil installé. La compatibilité avec les produits peak design est parfaite comme le montre les photos. Tout est fabriqué en métal y compris la plaque, ça devrait durer un bon moment ! Inconvénient pour moi, elle pèse son poids ! Idéal pour un trépied, je l'avais acheté pour un monopode carbone de 500g, je la retourne parce qu'elle rend l'ensemble trop lourd alors que le produit n'a aucun défaut.