iPad Pro 12.9-inch

Excellent screen protectors for the price. They come well protected in a box with all instructions and cleaning wipes etc. If the instructions are followed they are quite easy to fit, providing care is taken. Most of my immediate family use them as well.

I don't normally bother writing reviews for my purchases but I'm so impressed by this screen protector that I thought I would this time. I've bought and applied many different screen protectors of different kinds for various devices over the years and found that this one has gone on the best. Absolutely no bubbles!! I was very nervous because of the size of the screen (12.9 inches) that I would have difficulty but it went on perfectly at the first try. It comes in a very sturdy box with a cloth for cleaning, a blue sticky sheet for removing dust (which was perhaps a bit smaller than I would have liked but I can't complain about the results) and a couple of sticky tabs to help you align it. The protector itself is an absolutely perfect fit from edge to edge (barely a quarter of a millimetre smaller than the original screen) and around the home button and with about 0.5 to 1mm clearance round the front camera. For this reason it is important to get it lined up right and to do this I ignored the instructions (which say to put the tabs in opposite corners and lower the whole thing down onto the screen in one go). Instead, after cleaning the screen, I lined up the protector, with the protective backing film still on, and stuck tape onto the front of the protector that wrapped round the long side of the iPad and round to the back of the iPad to make a kind of hinge at the top and bottom of the long edge (making sure the tape was pulled quite tight). I used the two sticky tabs supplied to stick on the opposite edge to use as handles. I lifted the protector out of the way and used the blue sticker to remove any dust on the iPad screen. Holding the protector by the tab handles I peeled off the protective backing (trying to keep the underside facing downwards as much as possible to avoid dust falling onto it) and used the tab handles to lower the protector into place while pulling to keep the sticky tape hinges tight to keep everything aligned. The result was perfect! Before I applied the protector the iPad screen tended to be a complete fingerprint magnet and a constant smeary mess. But the protector is absolutely brilliant. I've been using it for a few days now and haven't cleaned it once but I can hardly see any fingerprints. The clarity and sensitivity seem great too. I would thoroughly recommend this product.

Nice quality and easy to fit, used several of these and like the way they are packaged, essential to ensure the screen is spotless, even if you think it is it may not be. The screen wipe and cloth are good for girly hands, I find them too small and fiddly, but that is just me, easy to get oils from your hands onto the part of the wipe and cloth that contacts the screen, then you wonder why there is a bubble, so I prefer to use my own cloths and isopropanol. A dab hand with the squeegee and never get bubbles

I was sceptical about these screen protectors, because I thought they would be really thick and so I didn't really see the value compared to a regular film screen protector, but BOY was I wrong. I took off one star because of a couple of little things which I highlight below, but overall I am really happy with this product. Placement on tablet This is a great product, it was really easy to handle, because it is a solid piece you are trying to stick on your screen not a flimsy film that goes everywhere and the instruction were clear as day. It comes with two stickers that are supossed to help you putting the protector on, but I found that mine werent strong enough, so they kept coming loose off the protector.. so I didn't have much use for those, however it was still really easy to adhere, because again, it is a solid protector, so easy enough to hold on to by the sides. Finally, It was super satifying to place it on top and be left with NO. BUBBLES. NONE. That was just great and already enough reason for me to recommend this product. Protector itself The protector was a lot thinner than I expected an feels really 'smooth' on the surface of your tablet. That might sound weird, but thats truly how it feels. The thickness does not in any way influence the clearity of your screen. The only time you can notice the thickness of the product is when you use the fingerprintscan. It doesn't affect the quality of the fingerprintscan, but you can just feel how thick the protector is because your sliding your finger across the edges onto the scanner. There is a little hole in the protector for the camera. However, I have one of those camera guards and the adhesive on those does not permanently stick onto this protector. It will not fall off, but there is just some wiggle room. Finally, it is perfectly made for the Ipad mini 4 with no indication that this is made with universal use in mind. So the seal on the protector is really tight to the ipad itself. This also made placement of the protector easier in my opinion, because there was not alot of wiggle room to place the protector on skewed. I have been using it for a week now and I am very pleased with it. No scraches, so happy me:) No fingerprint - NAH Yeah, so I didn't have high hopes for this claim anyways, but given that it is stated by the manufacterer I will review this as a false claim. So in the product description it mentioned that it wouldn't leave any fingerprints on the screen. To be fair, the amount of smudges left on the screen after a day of regular use is indeed less than with a regular protector, it is not 0. So if you are interested in this product, just because you dont want to see any smudges on your screen when you are working with you tabled, this is not for you. However, if you think this is just a nice bonus to a otherwise great screen protector, then I would recommend.

Good quality screen protector

So i was abit hesitant to buy any screen protector for my ipad pro mainly because i knew that the install of it would be a nightmare. However i noticed a hairline scratch on my screen the other day and decided i don't want to ruin the screen anymore. I decided to get a screen protector and chose to get a tempered glass one because i have matte screen protectors over all my gadgets ans although it is great because you get no fingerprints, not reflections. It honestly ruin the screen resolution. I applied screen protectors on large screen devices before (surface book and galaxy note pro 12.2) so i kinda had an idea what to expect. But i gotta say. Up until this screen protector, i hadn't had a perfect install. I can't say the installation was easy. I mostly used the same procedure to install the icarez screen protector but i made my own DIY icarez kit with just wide tape (the one used for electrical work) and aligned the screen first. Taped it on at one side. Created my own handles using tape (didn't use the tiny stickers they provide. I don't know if that would've worked) to lift the screen. lifted the screen. Cleaned the screen carefully with the cloth provided. I had to test my own handles i created before actually removing the back cover to install the screen just to make sure when i lift the screen it doesn't fall and it lands on the screen aligned. Then used the sticker to remove dust particles. It's not easy since dust particles keep falling.. But i tried to be a bit patient with it and be very quick when i actually start putting on the screen protector so no more dust particles fall on the screen. I ended up not having any dust particles under the screen (Thankfully) tried to remove all the bubbles but had three coin sized bubbles that were just stubborn. However since there wasn't any dust particles under those. I searched online and it seems that sometimes some "moisture bubbles" can be a bit tricky but they usually go after awhile. So i decided to not try and take the screen protector off and just leave it and wait. Then next morning. Viola. No bubbles. Cons: -Tricky to install but mainly because of the large screen size. -i would've preferred they provided more products for cleaning the screen other than the cloth. Wet wipes and dry wipes for example. (i was a bit worried that the bubbles i had at the end was because i didn't clean the screen by nothing other than the cloth they provided but since the bubbles disappeared. It's fine) - The ipad pro screen is such a fingerprint magnet. The screen protector limit that slightly. But i can't say it is fingerprint free screen protector. Nothing like an actual matte screen protector for sure. Pros - Price (not expensive in my opinion) -seems to be durable. - Screen still looks amazing after installing. Apple pencil still works fine

Firstly I'd like to say that delivery was superb as always - Amazon Prime (Next Day Delivery) Opening the Amazon packaging, very exciting as always. The packaging this product comes in is; - Eye-Catching - Easy to read - All the information you need ranging from the product features towards the comparison chart to the instructions. When you open the yellow box (that the product comes in), You are greeted with the Blue Dust Film, Cleaning Cloth and the Location Label. Then you will see the Screen Protector in a soft foam like sleeve to protect it whilst travelling to your house. Applying the Screen Protector has always been a pain in the bu**. No longer is that issue valid as this protector is the most easiet screen protector to apply. All you need to do is line up the home button and the front camera and press down slowly and wala! No bubbles means a Happy Customer ;') And I for one am a very satisfied customer who shall be purchasing again very soon for other products that I will own in the future. Why should you buy this Screen Protector? So your initial thoughts are probably that this screen protector is very expensive when you do a comparison against the cheaper screen protectors. But this Screen Protector will actually do the correct job that you actually want it to. What do I mean? This Screen Protector has a 9H Surface Hardness which means that if you do drop your phone/tablet and the screen does smash, there is a BIG chance that your phone/tablet screen is NOT smashed but the screen protector is smashed which will save you ALOT of money. A regular cheap Screen Protector that you can purchase around 0.50p to 2.99 has a 1H to 4H Surface Hardness which if your phone fell, it would not protect your screen and you would have to end up replacing your screen which can be a hefty amount. Think about it, would you rather replace a Screen Protector that you purchased for £7 or replace your phone/tablet Screen and may more than £100. My phone fell on the pavement and my heart sank but I took the Screen Protector off and my phone screen was perfectly fine, the Screen Protector was smashed. So I have saved myself a whole lot of money, now the question is Do you want to risk it? I am a Youtuber which means I have recorded myself applying the Screen Protector onto my iPad. I will upload the link to the video here as soon as I've published it. Alternatively you can check it out at www.youtube.com/Unboxingndreviews

Great quality product, easy to attach

Just I need to tell you it’s on of the simplest products I’ve ever used in terms of installation. Finally got a well-designed screen protector without finger prints marks and easy clean.

Ürün elime 3 günde geçti bukadar çabuk geçeceğini tahmin edemedim sevindim. Ayrıca fiyat performans ürünü. İlk denememde sorunsuz taktım. Hava kabarcığı bırakmıyor. Kesinlikle tavsiye ederim. Firma çok ilgiliydi. Parmak izi de bırakmıyor. Paperlke tercih edecektim ama görüntü kalitesini bozduğu için etmedim. İyiki bunu seçmişim.

Questa pellicola JETech è esattamente ciò che cercavo per il mio iPad Pro 12.9" di seconda generazione. Facile da applicare, ben confezionata e con una qualità che si nota subito. 🛡️ Vetro temperato 9H Resiste ai graffi, anche quelli più aggressivi. Ho provato con le chiavi in tasca: nessun segno. Lo spessore di 0,33 mm è perfetto per proteggere senza compromettere il touch. 📱 Alta trasparenza e sensibilità Lo schermo resta luminoso e reattivo. Nessuna interferenza con Apple Pencil o con il touch. Sembra quasi di non avere nulla sopra. 🧼 Installazione senza stress Niente bolle, niente polvere. Basta seguire le istruzioni e usare il kit incluso (panno, adesivi, guida). In 5 minuti è perfettamente applicata. ⚠️ Compatibilità da verificare Attenzione: non è compatibile con i modelli 2018 e successivi. Solo per iPad Pro 12.9" 1ª e 2ª generazione (modelli A1584, A1652, A1670, A1671, A1821). 💡 Conclusione Un prodotto semplice ma efficace. Se hai un iPad Pro 12.9" del 2015 o 2017, questa pellicola è una scelta sicura e conveniente.

çok hızlı geldi, ürün de çok kaliteli. tavsiye ederim.

Bon qualité