175 degree hinge

These are exactly what I needed. I have a 1.5 inch thick lid on a chest. The lid is against the back wall and these hinges allow the lid to lift without hitting the back wall. The self close feature is nice. Quality is very good for the price. M

Needed hinges that could open an in-wall medicine cabinet heavy mirror door with zero room for any door edge to move back towards the wall. Also couldn’t use the long edge book-binding like hinges. These mount inside the cavity but take up very little space. They lift the door forward while it turns, just enough for clearance. They are slow-close too, but the last half inch speeds up, so use felt circles to quiet the bang. 6 months usage so far and I’m pretty sure these metal hinges will never fail, but you have to be careful how you mount them to your wall to support the weight. I used big drywall anchor expanding thingies, no wobbling yet but I don’t entirely trust them, and may knock in there and attach a piece of wood to a nearby stud for anchoring.

Installed as part of a custom printer crendeza build. The hinges are very heavy duty holding teak wooden doors (1” thick x 18” wide x 24” long; approx 7lbs ea). The soft close was less noticeable in my application, but hold the doors w/o issue. Mounting took a but if work and there is a looseness or play in the hinge that you should learn to compensate. The flathead philips screws are soft and don’t help any adjustments. I ended up replacing them with torx style button head screws for improved torque. See Hilitchi 50 Pcs #8 x 3/4” Stainless screws. I would purchase again for applications that prohibit putting a large counterbore to help hold the hinges.

Quality hinge(s). Only a very small amount of play. I installed one on a plane access hatch.

Worked great on a mantel project.

Claims to be "Hydraulic", but this is a deception. Buyers, be aware of this and skeptical of other claims.

These things are beastly in construction and absolutely good quality. I am going to install them in the coming days, but after messing with them a bit and feeling how sturdy they are and how heavily constructed they are. I think if you are looking for heavy-duty hinges this would be a good choice if they suit your needs. I'll be putting them on my hidden door and if you do not see any changes within several days, then you know they are working as advertised or better. Based on the heavy-duty construction I am expecting better than advertised performances, to be honest.

I recommend this product for the price. Keep in mind that the hardware is not soft close and may pinch a finger when the face panel closes shut. One draw back that the mounting holes are only available for the vertical edge of the cabinet. The horizontal edge #1 does not have mounting holes and does have a small amount of flex when opening and closing the cabinet face panels. I imagine with time the 2 vertical mounting screws will be the weakest point and possible damage the cabinet mounting edge. The #2 screw is easily adjustable for the limit open of the hardware hinge. I just marked with a sharpie and adjusted accordingly for each side. Ex: 5 turns on the left hing using the sharpie mark as a guide then I would adjust the opposite hings accordingly. The hinges are strong and SNAP close so be careful. The tray that come with the hardware are good but did not have the screws/hardware to mount. I just used 1/4 inch screws with the head small in of to slide the trays in and out for cleaning. I recommend attaching the cabinet face panel with the hing screw #2 in the fully open position. Plan the appearance of how the cabinet face panel will look once closed. There is no room for adjusting the level position once all the screws are in place. Place 1 screw first and test if the panel closes properly then place the remaining screws and secure firmly.

No he conseguido que funcionen sin bloquear las puertas

Ce sont des charnière formidables pour une porte en coin

Mycket stabila gångjärn, men möjlighet till finjustering av dörrpositionen när gångjärnen är fastskruvade saknas.

Did the work required

Wollte sie eigentlich für Türen am Dachboden-Drempel verwenden. Hat da nicht funktioniert. Sind jetzt in der Außenküche verbaut. Funktionieren gut