ZoneMaster 10-Inch Normally Open Motorized Damper — Power Close/Spring Return 24V Vent Damper, Plug-In Transformer Included (ZO210)

Fast shopping, perfect production.

This really works. Mine is in the attic, and I can't hear it at all from the 2nd floor bedroom just below it. The design uses a motor (not a solenoid) and has "lost motion" so the motor runs a few seconds before the driver bar actually engages the baffle. See the video for timing. You must leave power applied as long as you want it in the powered state... a spring drives it back to the starting position when you remove power. The motor gets very warm to the touch, but not dangerously hot. I measured the power draw and temperature but that was long before I wrote this review... maybe 10 W and 105 deg F? I'll update this review if I climb back up there and retest. I recommend using a power switch or plug with a built-in timer so you don't accidentally leave it in the actuated position all day and make your bedroom so hot the wife notices. Oh, and make sure you use plenty of foil hvac tape to avoid air leaks. Note: this design is either all-on or all-off... the design isn't amenable to driving the motor to a different position each time based on temperature measurements in the room.

We had a situation were one person room needed more cooing than heat... This was a great solution

Works as described. Includes a plug-in power supply but not the wires to connect the damper to the supply. The device is NOT UL or ETL listed (only the power supply is). When open the device consumes no power. When closed I measured a power consumption between 7.9W and 8.4W (8.1W average).

Worked like a charm fast shipping no hassle

Work great, cheap price and made in the USA

Dudes! I hands down could not survive without this most awesome of all dampers. It saved my relationship with my gf. My dog likes me again! I highly recommend it

Perfect, but they seem to need replaced every few years

Properly installation on the right duckwork is important.