Milwaukee BEM802 Combination pH/EC/TDS Meter with 110V Power and ing Kit, 0.00 to 14.00 pH, +/-0.20 pH Accuracy

• Portable pH, electro-conductivity (EC), and total dissolved solids (TDS) meter used for hydroponics, greenhouses, and farming applications.
• Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures and manual one-point calibration using dials for quick custom calibration.
• Single-line LCD screen for ease of viewing.
• Interchangeable combined pH, EC, TDS, and temperature probe.
• ing kit and probe holder allows setup as continuous monitor for flexible meter use.

The Milwaukee BEM802 is a portable pH, electro-conductivity (EC), and total dissolved solids (TDS) meter with Automatic Temperature Compensation (ATC), manual one-point calibration using dials, a single-line LCD screen, a combined pH, EC, TDS and temperature probe, a ing kit, and a probe holder. A pH/EC/TDS/temperature monitor is used by researchers and hobbyists to measure ent parameters and substance conductivity in hydroponics, greenhouses, horticulture, water-testing, and scientific applications. The single-line LCD screen displays the current measurement. This meter has manual two-point calibration through dials on the front panel. The meter comes with the MA850 combination, amplified, double-junction, gel pH electrode with incorporated EC/TDS probe and built-in temperature sensor and 1m (3.3') cable. The meter uses a 9V battery (included) for approximately 150 hours of continuous use and an auto power-off feature turns the meter off after eight minutes of inactivity to extend battery life. The meter has a factory-installed 110V to 9V power converter. The BEM802 also comes with a ing kit, probe holder, calibration sachets, and instructions. Specifications -------------- pH range0.00 to 14.00 EC range0.00 to 6.0mS/cmTDS range0 to 4000ppmpH resolution.01EC resolution0.01mS/cmTDS resolution10ppmpH accuracy at 20 degrees C+ or - 0.20EC/TDS accuracy at 20 degrees C+ or – 2 percent full scale (F.S.)ATC range0 to 50 degrees COperating temperature0 to 50 degrees C (32 to 122 degrees F)Operating relative humidity95 percentDimensions185 x 82 x 45mm/7.3 x 3.2 x 1.7 inches (H x W x D) Meter weight165g/5.8oz. (with battery) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agricultural, wine-making, and water-testing, and for scientific applications. Some pH meters may measure additional parameters such as dissolved oxygen (DO), conductivity (also called electro-conductivity or EC), temperature, total dissolved solids (TDS), salinity, resistivity, or oxygen reduction potential (ORP)/mV. Milwaukee Instruments manufactures electro instrumentation and solutions for water analysis under the Milwaukee and Martini brands. The company, founded in 1998, is headquartered in Rocky , NC. What’s in the Box? ------------------ * BEM802 portable meter * MA850 combination pH/EC/TDS probe * pH 4.01 and 7.01 calibration solution sachet (20mL) * 1413μS/cm calibration solution sachet (20mL) * 1500ppm calibration solution sachet (20mL) * 9V battery * Instructions