NOYITO AC to DC Power Supply Module 36V 5A 180W Max High Power Industrial Power Module AC 120V 100V-240V to DC 36V Power Suitable for Civil Industrial Electrical Power Supply (36V 5A)

I have a Klipsch Cinema 600 soundbar that I got in December 2020. Its worked 4 years and 5 months until it stopped turning on again. After research it seems like almost everybody that had this model have had the same problem where it wont turn on. Found this power supply seems to be the go to. I was able to DIY this repair easily by following posts on reddit and Klipsch community forums. This fixed it! So much better than spending hundreds of dollars for a whole new setup! The sound quality is great so why not spend less than $20 to repair a decent system vs spending a fortune on a new one and having all this go to e-waste. For mine it was fairly easy to wire up. Large red/black into DC1 + / -. VDD (Black) and STB (Red) tied together to + DC2. White to - DC. On the high voltage side both reds into the locking push terminal. It works great. HDMI-CEC turns the soundbar on and off with the TV as expected. The mobile app connects. Its like brand new again!

Easy fix for my Cinema 400. Saved me from having to buy another soundbar. I went to the Klipsch forums and found the fix and this was the recommended power supply to get. Its does the job and for the price it was well worth it! The components appears to be well made, hoping it gets at least another 5 years out of this soundbar.

My son and I installed this power supply in our dead 6 year old Klipsch Cinema 600 soundbar nearly four months ago and its still going strong! Saved us alot of money! I did have to drill a new mount hole in the back but the fitment was not a big deal.

The power board is not the perfect replacement board for Klipsh cinema 600. It turns on the soundbar and the subwoofer correctly. The system works as it supposes to. The 5V and 24V are up. When the TV is on, the soundbar and the subwoofer work. (I connect small white and small red wires together to +5V, 4th from the left, and small black wire to ground 3rd from the left). But the problem arises at turn off. When there is no source (TV off), the soundbar and the subwoofer don't turn off, or go to standby mode like what it's done by the original power board. I don't have the schematic of the original power board, but I guess it has to do with the 5th wire. The original power board output has 5 wires, and this replacement board has 4. If one doesn't mind about automatically going to standby mode (or turning off), then this board is a perfect replacement. The original power boards are sold in China but it's a wholesale, not retail.

Fixed my klipsch 600 soundboard. Easy and saved me $600.00 instead of buying a new sound bar

Using this for an arduino project with a stepper motor controller. This power supply provided dual voltages to power my arduino uno and provide 24V for my stepper motor driver board.

It worked!!! See picture on how I wired it. The board is not exactly the same as the original but it works. You will need to splice the wire to put on the new power supply. See the picture on how I wired mine to work. I removed the small mounting brackets from the old power supply and installed on the new one. This power supply is smaller than the original. I bought my soundbar in April 12, 2021 and it died Sept 18, 2025. It seems that this is an issue with these soundbars. So if yours died, try this power supply and resurrect your soundbar.

Exact replacement for my Klipsh cinema soundbar.

Got it today and did somee basic testing and found all seems to work as expected. A couple of smaller issues: 1. The input AC terminals are poorly marked, the only indication is a 220V print that got me worried since I need it to be 110V. 2. The DC output terminals should be at least the same type as the AC type since they should accept lower gace wires. Otherwise I am pleased with this purchase so far.

This power unit that can fix your sound bar 48 ( KLIPSCH)

Good item and easy to replace. Thanks.