Tourna String Meter String Tension Tester

As soon as I got it I checked all my family's string including my kids junior rackets. The meter was close to what I expected and showed a large range on each racket that was consistent with ho they were strung. Then I went to the courts and started checking all my friends rackets (They were begging me to...). All of the rackets were pretty close to what they were supposed to be including the people that were having their rackets strung loose (About 40lbs), I did find one racket that was supposed to be strung at 50lbs but was tight at about 62. The guy was not shocked as he said the strings felt very tight and he did not trust the guy that strung his racket. I cannot say that I would trust the meter to give me perfect readings but if you take several readings on different strings you can get a good average and I am convinced it will be close. More importantly I can tell when it is time to restring and stop blaming some of my bad hits on old strings!!

My racquet was supposedly strung at 40 pounds. The String Meter came out at 40 pounds for the long strings, but only 30 pounds for the cross strings. I took a few measurements from various tennis friends racquets. More often than not, the measurements were rather unsettling and seemed to have little correlation with the supposed racquet string tension they had ordered from the stringers. I think this gadget works really well in terms of measuring the string tension of your racquet over time. You can tell how much tension your strings are loosing over time. But, in terms of checking the accuracy of your friends racquets I am not too sure how well it works. What I get from this is that racquet stringing is a very imprecise art. Let's say you order string tension of 50 pounds with the exact same racquet and same strings from several different stringers. I have no doubt there will be marked differences between all of them. I suspect this difference could be associated with a very wide range. Between the lowest and highest you well could have a difference of 20 pounds (you order 50 and you get a low and high of 40 vs 60). The second issue is how do you measure this accurately. That's a tough one. I am not sure how precise the Stringmeter is. Another weird finding is that I observed that the cross strings often come out at far lower tension than the long string. This is counterintuitive. From a physics standpoint you would think the opposite be true. A shorter string is much less flexible, and returns greater resistance to any torquing than a longer string. However, in essence the cross strings and the long strings make for two completely separate string jobs. Is there something in the standard stringer technique that make it so (that cross strings are associated with lower tension)?

It's easy to work with just to keep track of how your string loses tension but doesn't bother with the reading accuracy. I just strung my raquette on 55 and it reads 40. Even if I'm off by 5, it's still off by 10.

For how much this thing costs, I expect a whole lot more. It looks and feels quite cheap, like it could have been made for a couple of bucks at most. That I could forgive if it worked correctly. However, on my freshly strung racket, at 55lbs, my sample reads - *30*. I verified it with a few other rackets and it is essentially reading 20 or more lbs off of the true number. I get that it just has to be consistent for it to be useful, but it does need to be close to the right number too. I've returned it as defective and I'm expecting a replacement. We'll see if it is any better. I'd just return it if I didn't instinctively toss the packaging already.

Before purchasing this item, I read many of the reviews posted on Amazon regarding how inconsistent this device is, and how readings are different at different locations on the string-bed. I have found exactly the opposite. Firstly, the instructions clearly say that the device should be used at the center of the racquet, not at random locations. Secondly, I string my own racquets and use this device to determine the accuracy of my job. I find that this device measures string tension with a high degree of accuracy every single time, matching the tension I had strung the racquet at. The key is to ensure that you set the string gauge on the device to the string gauge on the racquet. Over time, the device also indicates when tension loss is encountered, and when to change strings based on obvious performance changes to your game. My only minor complaint would be that within 1 hour of using this device, the spring popped out of it, but was easily re-inserted thereafter and it retained its accuracy after the fix. Be careful when using it to prevent this from happening. In conclusion, not only does this device indicate when I string racquets accurately, but also when to change strings and which strings tend to last longer than others with regards to tension maintenance. Highly recommended for any serious player.

This meter is fairly easy to use, but the measuring is quite inaccurate. It is about 5-10 pounds under, and thus really cannot tell you the real tension. However, the errors is kinda consistent, making it somewhat useful to track changes of tension. Not a great product, but has certain use.

I love how easy this is to use and that it doesn’t require electricity or batteries to use either. I also appreciate that it can measure the gauge of the string as well as the tension, as someone who gets my racket strong at a shop, I’m not even sure what gauge they use and now I know my strings better than before. I’m still working on remembering to check the tension before and after I have a hitting session, but even though I miss some sessions, it’s still helpful to get the reading and I am noticing it slowly get looser. I’m excited to figure out which tension is my sweet spot after more experimentation.

It's a useful little tool I use when I start the first few strings while stringing. It's also useful to get a concrete number to track tension loss after playing if you have trouble telling from racquet feel. Sometime you'll get weird numbers that arent correct depending on stringbed and material, (EX: string racquet at 52 lbs. verify at 52 lbs with meter. String crosses at 52 lbs, meter says mains are now 70 lbs, tuning app puts strings at 52lbs. Maybe it's the added tension of the crosses yielding the high reading bc sometimes after moving them around you'll get lower numbers) but other than that it's served it's purpose and remains in my stringer tray to help me out.

Słaby pomiar . Nie polecam

expensive but does let you compare relative tensions from one stringing to another.

Einfach und gut !!!!! funktioniert SUPER !

Bra strängmätare

Easy to use.