DS-1280ZJ-XS Aluminum Bracket Junction Back Box for Hikvision DS-2CD2042WD-I, 2CD20xx Series Bullet Cameras (1 Pack)

I ordered this box for the install of my reolink cameras and as shown by the pictures they fit perfectly. I tested this with the reolink-410 (pictured) and it works great! Unfortunately it does not fit the reolink-420 fixed dome camera as the hole patterns do not line up. I used PG16 nylon connector which didn't easily screw into the base but it provided a tight, waterproof connection. I grabbed the box because I needed a way to hide the 3 wire pigtail that hangs off these cameras and for the cameras to be mounted just off the house. I will note that the pigtail is tight inside the box and there isn't much room for anything else, but not too tight that everything doesn't fit. I also didn't want to spend as much per a box as the other ones available on Amazon so this box fit the price range for me since I needed to purchase 6 of them. The box DOES NOT come with the nylon wire seal I've shown pictured, but I was able to purchase those separately for 5$/20. The camera does come with (4) mounting screws to attach the camera to the base and (3) screws/anchors for attaching to the home.

Bene sono originali

Difficoltà di montaggio. Seppur funzionale, per me , non è uguale all'originale hikvision.

First thing first, even though these junction boxes weren’t made to fit my Reolink RLC-410 cameras, I’m giving them 5 stars! To get everything working as shown in my pics, I had to drill some additional holes to fit my camera and anchor them with small hex bolts on the underside of the box cover. Once everything was aligned, drilled and anchored, the boxes are prefect. They’re a great size, not too big and not too small to fit the camera cable and connectors. It’s a tight fit, but looks great when it’s all done.

I was only able to line up two of three screws for attaching the LaView LV-PB932F4 to the box. However, the camera is still very secure. I was able to keep the entire pigtail coiled up in the box. It was only tight because I kept the water tight RJ45 connection intact within the box. Its a pretty long connector assembly. The grommet for cable entry is a bit large for a typical Cat5e/6a Ethernet cable. I couldn't get the grommet to 'seal' or clamp the cable exiting the box. Other than that the box works fine as intended.