SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size; Holds up to 265 pounds Each in 1/2-in Drywall by TOGGLER (20 Pack)

Lifesavers. These things are incredible and heavy duty. So happy am with my purchase. I used them to hang large scale paintings in a commercial setting and let me tell you the weight capacity of these is incredibly. They are very nice and heavy duty. Installation was a breeze with them as well. I had zero issues with them, they functioned exactly how they should and I’m confident in their construction and longevity. Everything I needed was included in the box as well. Value for the money here is incomparable to other options I found. To get this many for the price and Harvey them be so well made is incredible.

I had heard about these through “This Old House.” I needed to put some up some shelves in a room where the studs aren’t readily available, so I thought I would give these a try. And they work pretty well. They require a 1/2” hole, which is a bit large and leaves a lot of drywall dust on the floor. Once you’ve drilled the hole, the deal is to slide the plastic legs until the metal piece is perpendicular to the wall, slide the metal piece through the wall and (this is important) pull back on the plastic legs until the metal piece is flush against the back side of the wall. If you don’t get this right, the metal piece won’t be in place to accept the bolt. Then you slide the plastic collar down the legs until it is flush with the front of the wall. Once you’ve slid the plastic collar into place, be careful breaking off the plastic legs. They will have a sharp edge and can nick the wall if you’re not careful. I wasn’t, and now have a couple spots I need to touch up. All of that said, these anchors are rock solid and worth the money and learning curve. I don’t like to use anchors, but they’re a necessary evil at times. And these are probably the best I’ve used.

These are great for hanging heavy stuff without a stud, easy to use, well made and come with the screws as well.

I'm definitely a fan of Toggler dry wall anchors. They're so much easier to use than traditional toggle bolts. That said, they have about a 20% failure rate. Sometimes everything doesn't line up (especially if you're running into insulation) and the bolt won't catch or the plastic breaks. It's okay with me - I shrug and just buy extra.

I bought these toggles for the purpose of mounting some cleats for a shelving project that I’ve been working on, in any spots where the cleats did not align with a stud.. I needed a mechanism that allowed me to drive holes straight through a layer of wood + drywall at the same time, and this product is what I ended up stumbling upon! I’ve never used any kind of toggle-bolts historically, but I did not find these difficult to use by ANY means. Although, I do think it is important for beginners to pull up an instructional video to get a quick idea of how they work, when you’re using them for the very first time. The official company YouTube has a great guide - It is titled ‘SNAPTOGGLE Toggle Bolts’ (channel: TOGGLER Anchors, posted in 2009). Now I do believe that there are a few minor caveats with using these, & I just wanted to make sure that I brought attention to them: #1 • When you’ve reached the step of pulling the zip-tie style straps tight to secure the metal channel to the inside surface of your drywall, you MUST ensure that it gets pulled as tightly against the wall as possible. During one of my first attempts, I believe that I could’ve clicked it tighter once more, but it went unnoticed before I tried fastening the bolt to the channel — It absolutely refused to tighten down correctly. I believe that was due to the channel not being completely flush up-against the inside surface. #2 • On the same subject as the above note, when tightening the zip-tie straps down, make sure you’re ALSO simultaneously pulling the channel toward yourself. Otherwise, it is quite easy for it to shift out of place without you realizing. After pulling everything nice & tight, I would just shine a flashlight down the hole to make sure the inside threads were lining-up correctly. #3 • DO NOT push too hard when you’re initially starting to screw the final bolt. I actually made the mistake of doing that a few different times, which ended up causing the channel to get knocked out of the wall, & fall down into the inner drywall cavity. Be very gentle at first, until you’re confident that you can feel the bolt has latched onto the channel’s threading. Once you’re certain the bolt has caught the threads, it shouldn’t matter anymore how much pressure you’re applying to it when tightening. #4 • I would definitely anticipate losing a couple of toggles, & make sure the quantity you buy is a little bit more than what your project is going to require. This honestly shouldn’t be an issue for most, if all steps are correctly followed.. BUT everybody makes occasional mistakes, and the last thing you want is to run out of what you’ll need to finish up on your project. In Summary — 10/10 product that works really great, just make sure to be mindful of the things I’ve mentioned above, & don’t start blindly trying to install them without first pulling up the super quick video guide!

I learned about these from a friend and now use them often for hanging larger items. They make for a solid hold and strong mount. I have had several break off in the wall as I am tightening them down but I still give them five stars. Buy a few extra.

Works great

TLDR: Game-changer for mounting TVs on metal studs, strong and reusable. 📺🔩💪 Just when I thought I'd hit a wall (pun intended) with mounting my TV in my new room with metal studs, I stumbled upon these toggle bolts. And let me tell you, they're like the superheroes of the hardware world! These bolts are a marvel of design. Don't be fooled by the plastic tabs – they're not just for show. They play a crucial role in guiding and holding the toggle in place when the bolt takes a vacation. It's the reusable magic that sets these apart from the typical one-hit-wonder toggle bolts, which love to disappear behind the wall never to be seen again. And when it comes to strength? These bolts could give bodybuilders a run for their money. I've been swiveling my TV on its articulating mount like it's a dance partner, and not once have I doubted their hold. Of course, I had a bit of a 'whoops' moment during installation – drilled the hole too fast and ended up with some stubborn burrs on the metal stud. But a quick encore with the drill, and voila, smooth sailing. Setting the toggle is as easy as a wiggle and a pull, and then you just snap off the excess plastic guide strap with a satisfying click. These little geniuses are proof that sometimes, the best solutions are brilliantly simple. If you're facing a metal stud conundrum, these are your go-to. Two thumbs up, would recommend!

This product is a good buy compared to our local suppliers. Arrived on time and as advertised

Pro’s incredibly easy to install. Once in pkace nylon steps pop off with ease (using your fingers). I used these after a different, screw in anchor failed). Wished I’d use these first! Con’s - you do have to drill a half inch hole for each bracket (no big deal for most things).

Excelentes !!!

1年以上モニターを支えてくれてます。１年前から少しもズレずに同じ位置、而も引っ張っても壁が壊れない。ちなみに壁は乾式壁で木がない場所で１年以上支えてくれてます

My tv is still up on the wall, so that's a good sign. I've read many good reviews on these toggles so mine will be one of many. They're fantastic. Simple as that.